Description

The SLXD4Q+ is a quad channel digital receiver for use with SLX-D transmitters. With the crystal-clear audio and rock-steady RF that SLX-D provides, the SLXD4Q+ features a wide 138 MHz tuning range and easily pair with SLX-D bodypack, handheld and plug-on transmitters. Use audio output summing to set and manage wireless output levels and use RF cascading to quickly scale up compact and powerful multi-channel wireless systems for every application. SLXDQ4+ Quad Channel receivers four channels of wireless versatility, wherever required.

Features

Four channels in one rack space
Wide 138 MHz tuning range
32 available channels per frequency band (region dependent)
Transparent 24-bit digital audio
Extended 20 Hz to 20 kHz frequency range (microphone dependent)
118 dB dynamic range
Audio Summing matches receiver output to available mixer channels (4,3,2 or 1)
RF Cascade creates an 8-channel system by linking two SLXD4Q+, no other accessories required
Bias Voltage power supply management
Digital predictive switching diversity
Easy pairing of transmitters and receivers over IR scan and sync
4 XLR and 4 1/4″ outputs and 2 local ethernet connections
Compatible with Shure Wireless Workbench control software
Rugged metal construction

Specifications

Dimensions (H W D): 1.65 x 15.47 x 5.98 in. (42 x 393 x 152 mm)
Weight: 1750 g (without antennas)
Housing: Galvanized Steel
Power Requirements: 15 V @ 0.9
RF Input
Spurious Rejection: 75 dB (Typical)
Connector Type: BNC
Impedance: 50
Bias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)
Audio Output
Audio Frequency Response: 20 Hz 20 kHz (+1, -2 dB)
Gain Adjustment Range: 18 to +42 dB in 1 dB steps
Configuration:
1/4″ (6.35 mm): Balanced
(Tip=audio +, Ring=audio ,
Sleeve=ground)
XLR: Balanced
(1=ground, 2=audio +, 3=audio )
Impedance:
1/4″ (6.35 mm): 1.1 k (550
Unbalanced)
XLR (line): 500(250Unbalanced)
XLR (mic): 150
Full Scale Output:
1/4″ (6.35 mm): +12 dBV Unbalanced
(+18 dBV Balanced)
XLR (LINE setting): +18 dBV
XLR (MIC setting): 12 dBV
Mic/Line Switch: 30 dB pad
Phantom Power Protection:
1/4″ (6.35 mm): Yes
XLR: Yes
Cascade Output
Connector Type: BNC
Note: For connection of one additional receiver in the same band
Configuration: Unbalanced
Impedance: 50
Insertion Gain: 0-2 dB, typical
Networking
Network Interface: 20 Hz 20 kHz (+1, -2 dB)
Network Addressing Capability: DHCP or Manual IP address
Maximum Cable Length: 100 m (328 ft)