AKG C214 Prix Choc

Promo !

AKG C214 Prix Choc

Le prix initial était : 555,73 €.Le prix actuel est : 222,29 €.

UGS : SK0002197 Catégorie :

Description

AKG C214

The AKG C214 is a large-diaphragm cardioid condenser microphone. With its present sound, voices and acoustic instruments come through particularly well in the mix. Its sound is naturally open and rich in detail. Thanks to its low price, it is also affordable for home and project studios.

The AKG C214 has a very wide dynamic range. On the one hand, it works very low-noise, from which especially quiet signals benefit. On the other hand, the sensitivity can be reduced by 20 dB for recording loud sound sources. On drums, it can also be used as an overhead microphone or as a snare microphone.

The cardioid characteristic attenuates sound from behind and to the side. This helps when recording with high crosstalk from other sound sources, e.g. a live recording of an amplifier near a drum kit.

To compensate for the proximity effect, there is a switchable high-pass filter. It can also be used to remove low-frequency noise. The integrated capsule suspension effectively suppresses impact noise.

The housing is robust and suitable for stage use. Its special shape allows a guitar amp, for example, to be miked very to give the sound even more fullness.

The AKG C214 comes in a metal case with a matching spider mount and a windscreen.

  • 1 » large diaphragm microphone based on legendary C 414 capsule
  • Road-ready all-metal housing, impact- and scratch-resistant paint finish
  • Elastic transducer mounting reduces handling and cable noise
  • Switchable 20 dB pre-attenuation and bass attenuation filter
  • Includes elastic spider mount and robust metal case
  • Handmade in Vienna
  • Polar pattern: cardioid
  • Frequency response: 20 Hz – 20 kHz
  • No-load transmission factor: 20 mV/Pa
  • Limiting sound pressure level: 147 / 156 dB
  • Pre-attenuation: 20 dB
  • Bass filter: 6 dB/octave at 160 Hz, switchable
  • Phantom power: 12 – 52 V
  • Connection: 3-pin XLR connector
  • Dimensions: 160 x Ø 55 mm
  • Weight: 280 g