Description

The ART 4×4 Series PRO USB system may be used everywhere you need power distribution and conditioning. Systems feature a unique « 4×4 » AC jack layout on the back of the unit where four of the eight rear outputs are set 1.25-inches apart, allowing the user to plug in wide power cables and multiple wall warts devices.
Built into the ART 4×4 PRO USB Series is surge and spike detection/handling and it also has FRI and EMI filtering to eliminate cable induced noise in the AC power. A front-located brightly illuminated on/off power switch confirms the power source and USB charging ports provide access .
Total capacity is 1800 watts AC and the 15A breaker is conveniently front-mounted. The rugged, all steel chassis occupies 1U rack spaces and is intended for installation into standard 19-inch equipment racks. Applications for the 4×4 PRO USB Series Power Distribution Systems include PA systems, DJ sound systems, home project and commercial recording equipment.
Features
1800 Watt capacity
9 AC jacks
Surge and spike detection/handling
FRI and EMI filtering
1A and 2.1A USB charging outlets
Rack mountable; occupies 1U
Specifications
Power Capacity: 1800 Watts
Circuit Breaker: 15 Amp Domestic, 8 Amp Export Front Location
Power Outlets: Rear Outlets (x 8) Front Outlet (x 1) USB Charger 5V/3.1A (OVP&OCP)
Power Switch: Front Location
Illumination: Yes – In « On » Position
Surge & Spike Protection: Yes
Power Dissipation: 1800 Joules
Filtering: APF, EMI & RFI
Construction: All – Steel Chassis
Light Pipes: PB4x4Pro – None, SP4x4Pro – 2 Front Pull-Out Shock Mounted w/dimmer
Metering PB4x4Pro – None SP4x4Pro – Input Voltage
Dimensions (HWD): 1.75-inch x 19-inch x 6.5-inch, 44mm x 482mm x 165mm ‘
Weight: 5.5 lbs. (2.5 kg) PB4x4PRO, 6.3 lbs. (2.8 kg) SP4x4PRO 6.6 lbs. (3.0 kg) PS4x4PRO